A new AC system can underperform its own rated efficiency if the line set, refrigerant match, and load calculation aren't handled correctly during install. Every Ac Installation quote includes a proper cooling load assessment of your Brenham property.
New AC installations fail to hit their rated efficiency more often than people realize, usually because of an oversized unit, an undersized line set, or ductwork that can't move the air the new equipment needs. We size the equipment to the actual cooling load and match line sets to manufacturer spec, not the shortest route between units.
What we don't cut corners on.
Tonnage recommendations come from an actual cooling load calculation, not a rule-of-thumb estimate.
A range of SEER2-rated options lets you balance install cost against monthly energy savings.
You get a written labor warranty on top of manufacturer coverage, protecting the installation itself.
We follow manufacturer line set specs, since an undersized or overly long run quietly kills efficiency.
From load calculation to startup commissioning.
The assessment covers insulation, window exposure, and orientation so the equipment matches actual cooling demand, not a generic estimate.
Efficiency options get explained in plain terms so the decision is based on real numbers, not marketing language.
We size and insulate line sets to manufacturer spec, avoiding the efficiency losses that come from undersized or poorly routed runs.
Placement matters for airflow and noise, so units are set away from heat-trapping walls and debris rather than wherever's most convenient to run lines.
After installation, we verify refrigerant charge, airflow, and temperature split before considering the job complete, not just assumed correct because the unit powers on.
Old equipment is removed and disposed of properly, with refrigerant recovered according to EPA requirements.
Four steps from assessment to cold air.
Schedule an in-home cooling load assessment — sizing can't be done accurately by phone, since accurate sizing requires seeing the property.
Assessment tech arrives with load calculation tools and measures the space and evaluates the home directly.
You receive a written quote with equipment options at different SEER2 efficiency levels, based on your actual load numbers.
We install, verify performance, and back the work with a written warranty on labor.
Recent reviews from new system installs.
Went with the mid-tier SEER2 unit after they walked through the numbers on payback period, no pressure to buy the most expensive option.
— U. Falkenrath, homeowner
The crew placed the condenser away from our patio so it's barely noticeable, previous installer had it right against the wall we sit next to.
— R. Okonkwo, homeowner
New AC install and they actually tested the charge and airflow before calling it done, not just flipping it on and leaving.
— X. Provenzano, homeowner
Old unit removed properly and disposed of, didn't have to deal with a leftover condenser sitting in the yard for weeks.
— J. Ferreira, homeowner
Common questions before a Ac Installation project.
An accurate size comes from a cooling load calculation done in-home, not a general rule based on square footage alone correctly for your specific home.
It depends on your climate and how long you plan to stay in the home — we walk through the payback math during the quote.
A typical install wraps up in one day, longer if line set routing or electrical work is more involved.
We remove it and handle disposal, including proper refrigerant recovery required by EPA regulation, with refrigerant recovered to code.
Both ducted and ductless mini-split options are available, chosen based on what actually suits the home.
It covers installation workmanship for a defined period, separate from whatever the manufacturer covers on parts, in addition to the manufacturer's equipment warranty.
Installation service covers Brenham and the surrounding Brenham, TX zip codes listed below — call to schedule an assessment.
Call +1-844-611-2875
